Zoneminder: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
* |
* Install |
||
** ... |
|||
| ⚫ | |||
** Setup Paths for Certs |
|||
| ⚫ | |||
** Setup Unassigned Drive for storage<br/>Do this to lessen impact to array especially during parity check. |
|||
** Setup Swag [[SWAG - LetsEncrypt + Reverse Proxy]] |
|||
* Todo |
* Todo |
||
** Tune zones and sensitivity |
** Tune zones and sensitivity |
||
** Move Cameras to separate VLAN/LAN segment |
** Move Cameras to separate VLAN/LAN segment |
||
*** Boarder router should block all outgoing traffic initiated from the segment. |
*** Boarder router should block all outgoing traffic initiated from the segment. |
||
* Notes |
|||
| ⚫ | |||
| ⚫ | |||
* References |
* References |
||
** [https://zoneminder.readthedocs.io/en/stable/ zoneminder docs] |
** [https://zoneminder.readthedocs.io/en/stable/ zoneminder docs] |
||
Revision as of 15:12, 7 January 2021
- Install
- ...
- Setup Paths for Certs
- Setup Unassigned Drive for storage
Do this to lessen impact to array especially during parity check. - Setup Swag SWAG - LetsEncrypt + Reverse Proxy
- Todo
- Tune zones and sensitivity
- Move Cameras to separate VLAN/LAN segment
- Boarder router should block all outgoing traffic initiated from the segment.
- Notes
- FLIR camera RTSP URL: rtsp://<user>:<password>@<ipOfCamera>:554/cam/realmonitor?channel=1&subtype=0
- Use Low Bandwidth mode for Montage (maybe Mantage Review as well) screen
When in High Bandwidth mode the browser tab became unresponsive after adding more than 3 cameras.
It is possible that could be helped by changing on-camera settings to use a lower FPS and/or bitrate.
- References
- zoneminder docs
- OnVif Device Manager
This is the primary tool I used to find the FLIR cameras. - OnVif scanner
- zoneminder onvif scripting
- zmNinja