Zoneminder

• Install
  • ...
  • Setup Paths for Certs
  • Setup Unassigned Drive for storage
    Do this to lessen impact to array especially during parity check.
  • Setup Swag SWAG - LetsEncrypt + Reverse Proxy
• Todo
  • Tune zones and sensitivity
  • Move Cameras to separate VLAN/LAN segment
    • Boarder router should block all outgoing traffic initiated from the segment.
• Notes
  • FLIR camera RTSP URL: rtsp://<user>:<password>@<ipOfCamera>:554/cam/realmonitor?channel=1&subtype=0
  • Use Low Bandwidth mode for Montage (maybe Mantage Review as well) screen
    When in High Bandwidth mode the browser tab became unresponsive after adding more than 3 cameras.
    It is possible that could be helped by changing on-camera settings to use a lower FPS and/or bitrate.
• References
  • zoneminder docs
  • OnVif Device Manager
    This is the primary tool I used to find the FLIR cameras.
  • OnVif scanner
  • zoneminder onvif scripting
  • zmNinja
  • Reolink520 RMTP URL