Zoneminder: Difference between revisions

Revision as of 18:42, 26 August 2020

Notes
- FLIR camera RTSP URL: rtsp://<user>:<password>@<ipOfCamera>:554/cam/realmonitor?channel=1&subtype=0
- Use Low Bandwidth mode for Montage (maybe Mantage Review as well) screen
  When in High Bandwidth mode the browser tab became unresponsive after adding more than 3 cameras.
  It is possible that could be helped by changing on-camera settings to use a lower FPS and/or bitrate.
Todo
- Tune zones and sensitivity
- Move Cameras to separate VLAN/LAN segment
  - Boarder router should block all outgoing traffic initiated from the segment.
References
- zoneminder docs
- OnVif Device Manager
  This is the primary tool I used to find the FLIR cameras.
- OnVif scanner
- zoneminder onvif scripting
- zmNinja

@@ Line 11: / Line 11: @@
 ** [https://github.com/RogerHardiman/onvif-audit OnVif scanner]
 ** [https://forums.zoneminder.com/viewtopic.php?t=25755 zoneminder onvif scripting]
+** [https://github.com/pliablepixels/zmNinja zmNinja]