Zoneminder: Difference between revisions

From Pikes' Wiki
Jump to navigation Jump to search
(Created page with "* Notes ** FLIR camera RTSP URL: rtsp://<user>:<password>@<ipOfCamera>:554/cam/realmonitor?channel=1&subtype=0 ** Use Low Bandwidth mode for Montage (maybe Mantage Review as w...")
 
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
* Notes
* Install
** FLIR camera RTSP URL: rtsp://<user>:<password>@<ipOfCamera>:554/cam/realmonitor?channel=1&subtype=0
** ...
** Use Low Bandwidth mode for Montage (maybe Mantage Review as well) screen</br>
** Setup Paths for Certs
When in High Bandwidth mode the browser tab became unresponsive after adding more than 3 cameras.</br>
** Setup Unassigned Drive for storage<br/>Do this to lessen impact to array especially during parity check.
It is possible that could be helped by changing on-camera settings to use a lower FPS and/or bitrate.
** Setup Swag [[SWAG - LetsEncrypt + Reverse Proxy]]
* Todo
* Todo
** Tune zones and sensitivity
** Tune zones and sensitivity
** Move Cameras to separate VLAN/LAN segment
** Move Cameras to separate VLAN/LAN segment
*** Boarder router should block all outgoing traffic initiated from the segment.
*** Boarder router should block all outgoing traffic initiated from the segment.
* Notes
** FLIR camera RTSP URL: rtsp://<user>:<password>@<ipOfCamera>:554/cam/realmonitor?channel=1&subtype=0
** Use Low Bandwidth mode for Montage (maybe Mantage Review as well) screen<br/>When in High Bandwidth mode the browser tab became unresponsive after adding more than 3 cameras.<br/>It is possible that could be helped by changing on-camera settings to use a lower FPS and/or bitrate.
* References
* References
** [https://zoneminder.readthedocs.io/en/stable/ zoneminder docs]
** [https://zoneminder.readthedocs.io/en/stable/ zoneminder docs]
** [https://sourceforge.net/projects/onvifdm/ OnVif Device Manager]</br>
** [https://sourceforge.net/projects/onvifdm/ OnVif Device Manager]<br/>This is the primary tool I used to find the FLIR cameras.
This is the primary tool I used to find the FLIR cameras.
** [https://github.com/RogerHardiman/onvif-audit OnVif scanner]
** [https://github.com/RogerHardiman/onvif-audit OnVif scanner]
** [https://forums.zoneminder.com/viewtopic.php?t=25755 zoneminder onvif scripting]
** [https://forums.zoneminder.com/viewtopic.php?t=25755 zoneminder onvif scripting]
** [https://github.com/pliablepixels/zmNinja zmNinja]
** [https://wiki.zoneminder.com/Reolink#RLC-520 Reolink520 RMTP URL]

Latest revision as of 22:14, 9 December 2021

  • Install
    • ...
    • Setup Paths for Certs
    • Setup Unassigned Drive for storage
      Do this to lessen impact to array especially during parity check.
    • Setup Swag SWAG - LetsEncrypt + Reverse Proxy
  • Todo
    • Tune zones and sensitivity
    • Move Cameras to separate VLAN/LAN segment
      • Boarder router should block all outgoing traffic initiated from the segment.
  • Notes
    • FLIR camera RTSP URL: rtsp://<user>:<password>@<ipOfCamera>:554/cam/realmonitor?channel=1&subtype=0
    • Use Low Bandwidth mode for Montage (maybe Mantage Review as well) screen
      When in High Bandwidth mode the browser tab became unresponsive after adding more than 3 cameras.
      It is possible that could be helped by changing on-camera settings to use a lower FPS and/or bitrate.
  • References
Retrieved from "https://wiki.docgyver.com/index.php?title=Zoneminder&oldid=203"